Bell X-1 Second Generation FSX Package
$39.99 USD
Available on |
|
|
"Seldom I am still inspired.
Compatible with: |
The Xtreme Prototypes X-1 Second Generation add-on package for Microsoft® Flight Simulator X contains six variations of the four Bell X-1 Second Generation research rocket planes and one light variation of a modified B-29 "Superfortress" carrier aircraft to simulate high-altitude launch.
The Bell X-1 "Second Generation" was an advanced version of the original X-1, the first aircraft in history to have broken the sound barrier with Army Air Corps captain Charles E. "Chuck" Yeager.
The second generation of X-1s, built in the late 1940s and early 1950s, were designed to double the speed of sound and set new altitude records in excess of 90,000 feet. The new X-1s were similar to the original (orange) aircraft, with the same XLR-11 rocket engine (equipped with a turbopump), but were about five feet longer, 2500 pounds heavier and had a conventional glass canopy.
For the serious flight simulation enthusiast and X-1 fan, the Xtreme Prototypes X-1 Second Generation is a chance to relive important moments of the history of flight and experience the performance of a series of aircraft whose new rocket systems, cockpit ergonomics and flight controls were quite a challenge for the test pilots who flew them more than fifty years ago.
The Xtreme Prototypes X-1 SG addon package will allow you to fly at very high altitudes at more than twice the speed of sound in four different versions of the aircraft, simulate virtually all the procedures required during an actual research mission (including emergency procedures such as extinguishing an engine fire or jettisoning the canopy to bail out), and even test the never-built X-1C that was to be equipped with the Sperry A-12 Propilot system and a .50 caliber Browning machine gun.
The Xtreme Prototypes X-1 Second Generation add-on package for Flight Simulator X contains six variations of the four Bell X-1 Second Generation research rocket planes and one light variation of a modified B-29 "Superfortress" carrier aircraft (exterior model only) for simulating high altitude launch with specially-equipped X-1A and X-1B models:
Each add-on aircraft is fully detailed with over 500 parts and 40 animations, and has been carefully modeled based on available drawings, flight manuals, government photographs, movies and other archive material in order to conform as closely as possible to the real-world second generation Bell X-1s. The airplanes feature different high resolution reflective textures with bump maps, unique markings, movable control surfaces (horizontal stabilizer with an all-moving tail and elevator, vertical stabilizer/rudder, ailerons and flaps), extendable landing gear, front machine gun, yaw-damping surfaces and a retractable ventral fin (X-1C), movable canopy with cockpit details, pilot and animated stick and levers. All aircraft feature more than a dozen animated visual effects with sound, such as XLR-11 rocket engine igniter and flame effects, rocket engine contrail effects, engine smoke and fire, machine gun effect (X-1C), wing vortices, liquid oxygen bleed effect, propellant jettison effects and cold vapor around the LOX tank when filled. The X-1 Second Generation for Flight Simulator X is equipped with one Reaction Motors XLR-11-RM-5 four-chambered liquid-fuel turborocket engine, capable of delivering more than 5,900 pounds of thrust.
More screenshots |
|
Each aircraft comes with a fully functional virtual cockpit which contains over 800 parts and more than 200 animated gauges, switches, levers, light indicators and flight instruments. Each virtual cockpit has been meticulously created to conform as closely as possible to the cabin of the real second generation Bell X-1.
The full 3D gauges have been carefully designed and programmed based on the original analog instruments found in the real X-1 SG during the 1950s. Virtually all gauges, switches, lights and instruments found on each panel are functional and behave like the original ones found in the real aircraft. All custom rocket aircraft systems present in the real X-1 SG are also simulated. Three different VC configurations are available for the X-1 SG for Flight Simulator X. The virtual cockpits allow total 3D immersion into the X-1 SG flying environment and have been created for the desktop pilot to simulate almost every step and procedure required during a typical X-1 research flight. The VC has (fictitious) cockpit spotlights that are lit when the cockpit lighting switch is turned on (the real X-1 did not have cockpit lighting). This will allow you to fly the X-1 SG even at night. The four Xtreme Prototypes X-1 SG virtual aircraft are equipped with a modified (fictitious) ARC-5 radio for use with civilian frequencies in Flight Simulator X. The set has two VHF communication transceivers (COM1 and COM2), an automatic direction finder (ADF) and a radio-navigation receiver (VOR) to allow for a fictitious journey around the world in your X-1 at speeds beyond Mach 2.
More screenshots |
The Xtreme Prototypes X-1 Second Generation aircraft package comes with a comprehensive 85-page user manual inspired from the original Bell X-1 SG manual (PDF format, Adobe® Reader® 8.0 or later required). The manual contains the necessary information for the installation and operation of the X-1 SG virtual aircraft, 3D cockpits and associated instrument panels. The end-user is authorized to print copies of the manual for his/her own use, in conjunction with the add-on simulation software.
|
MINIMUM SYSTEM REQUIREMENTS
NOTE: Xtreme Prototypes addons are complex and require more processing power and RAM than other more conventional add-on aircraft packages. Increased performance will be noticed on more powerful systems. FSX SP2 minimum system requirements recommended. GENERAL FEATURESContains six variations of the four Bell X-1 Second Generation research rocket planes and one light variation of a modified B-29 "Superfortress" carrier aircraft for simulating high-altitude launch:
FLIGHT MODEL FEATURES Custom X-1 flight model to simulate rocket powered high-speed and high-altitude flight in FSX:
CUSTOM X-1 ROCKET AIRCRAFT SYSTEMS The following rocket aircraft systems are simulated to conform as closely as possible to the operation of the real second generation X-1 rocket aircraft, within the present limitations and capabilities of the simulator:
|
AIRCRAFT 3D MODEL FEATURES
3D VIRTUAL COCKPITS
SPECIAL VISUAL EFFECTS X-1-specific animated special visual effects, some with sound, including:
MISCELANEOUS
|
|
|
NOTE: Specifications are subject to change without notice. Check our web site for fixes and upgrades. |
||


































